Powersensor

This guide assumes that you have already setup your PowerSensor metering equipment, and is showing active data within the Powersensor app.

Please make sure you have registered ( register here ) or have an existing UtilityWise Account ( login here )

Step 1 - Log into your UtilityWise dashboard, and click the Setup Now link, or if you already have existing meters setup, click the top right menu, select Configuration, then click Add Meter under the + menu.

Step 2 - Select the Energy Meter option.

Step 3 - Give the Meter a name, and from the Type dropdown, select DiUS PowerSensor.

Step 4 - Next enter your username and password for your Powersensor account, the same one you use with the Powersensor app.

Step 5 - Select a Site, and optionally a building (there will be a default site if this is a new setup of UtilityWise, otherwise you can edit the sites and buildings via the Configuration menu), and click Next

Step 6 - The endpoints will be enabled by default, and will be populated and configured as per the Powersensor setup, adjust the names if required.

Click Next, and this will finalise the setup for the UtilityWise platform.

Please Note : The Powersensor data will update every hour, there is no realtime usage available to be shown.

From here you can also review the raw data for the metering as its being received, just click the data log icon to the right the meter endpoint.

You can also reset the data its received for any reason,  just use the Trashcan icon.